<p align="center">
  <img src="icon.png" alt="Spaces" width="180" />
</p>

# Spaces on StartOS

> **Upstream docs:** <https://docs.spacesprotocol.org/>
>
> Everything not listed in this document should behave the same as upstream
> `spaced` / `space-cli`. If a feature, setting, or behavior is not mentioned
> here, the upstream documentation is accurate and fully applicable.

Spaces is a permissionless protocol for sovereign Bitcoin-anchored identities.
This package runs the [`spaced`](https://github.com/spacesops/spaced) daemon
against Bitcoin **mainnet** and exposes [`space-cli`](https://github.com/spacesops/spaced)
through a browser-based terminal.

---

## Table of Contents

- [Image and Container Runtime](#image-and-container-runtime)
- [Volume and Data Layout](#volume-and-data-layout)
- [Installation and First-Run Flow](#installation-and-first-run-flow)
- [Configuration Management](#configuration-management)
- [Network Access and Interfaces](#network-access-and-interfaces)
- [Actions](#actions)
- [Backups and Restore](#backups-and-restore)
- [Health Checks](#health-checks)
- [Limitations and Differences](#limitations-and-differences)
- [What Is Unchanged from Upstream](#what-is-unchanged-from-upstream)
- [Quick Reference for AI Consumers](#quick-reference-for-ai-consumers)

---

## Image and Container Runtime

| Field | Value |
| --- | --- |
| Spaces image | `docker.io/horologger/spaces` |
| PostgreSQL image | `docker.io/postgres:16.3` |
| Subspaces image | `docker.io/horologger/subs:v0.1.0` |
| Certrelay image | `docker.io/horologger/certrelay:v0.2.3` |
| Indexer image | _**TODO** — prebuilt explorer-indexer image, not yet produced_ |
| Explorer image | _**TODO** — prebuilt explorer (SvelteKit) image_ |
| Architectures | `linux/amd64`, `linux/arm64` |
| Entrypoint | StartOS-managed (image entrypoints are **not** used directly) |

The Spaces image bundles `spaced`, `space-cli`, `bitcoin-cli`, `gotty`, `node`,
`npm`, `screen`, and a small shell environment. StartOS ignores the Spaces
image's `docker_entrypoint.sh`; daemons are defined in `startos/main.ts`. The
PostgreSQL image is the upstream `postgres:16.3`, launched via its official
`docker-entrypoint.sh`.

> **Note (build-from-source removed):** earlier builds compiled the Go indexer
> and the SvelteKit explorer from source inside `golang:1.23-alpine` and
> `node:20-alpine` builder images. Those images and their build chains were
> removed to shrink the `.s9pk` and eliminate the multi-minute first-enable
> compile. They will be replaced with prebuilt images (see the **TODO** rows
> above). Until then, enabling the embedded explorer starts **PostgreSQL only**
> — the indexer and explorer-UI daemons are stubbed out in `startos/main.ts`.

## Volume and Data Layout

| Path | Volume | Purpose |
| --- | --- | --- |
| `/data` | `main` | Spaces data directory (`SPACED_DATA_DIR`), wallets, indexes, and `store.json` |
| `/data/mainnet/.cookie` | `main` | Spaced RPC cookie (auto-generated by `spaced` at startup) |
| `/data/store.json` | `main` | StartOS-managed credentials (web-UI password, bitcoind RPC user/password, PostgreSQL user/password/database) |
| `/data/postgres` | `main` | PostgreSQL data directory (`PGDATA`). Owned by uid 999 (`postgres`). The whole `main` volume is backed up, so the database is included. |
| `/data/explorer-indexer` | `main` | **TODO** — reserved for the prebuilt indexer's runtime data. The build-from-source layout (source, `bin/sync`, `bin/goose`, marker) is gone; `reset-indexer-state` still wipes this path. |
| `/data/explorer-ui` | `main` | **TODO** — reserved for the prebuilt explorer's runtime data. The build-from-source layout (source, `build/`, `node_modules`, marker) is gone; `reset-explorer-state` still wipes this path. |
| `/data/subspaces/data` | `main` | `subs` runtime data (`SUBS_DATA_DIR`) — handles, proofs, config.db. Persists across restarts and enable/disable toggles. |
| `/data/subspaces/prover` | `main` | Working directory for the `subs-prover` daemon. |
| `/data/subspaces/registry` | `main` | Working directory for the `registry-server` daemon. |
| `/data/certrelay/data` | `main` | Certrelay data directory (`CERTRELAY_DATA_DIR`) — anchors, peer state, sqlite. |
| `/data/bin/fabric` | `main` | The `fabric` CLI, copied from the certrelay image on each start so the gotty terminal (which has `/data/bin` on PATH) can resolve handles. |

## Installation and First-Run Flow

On the first install, StartOS:

1. Seeds `store.json.password` with a random 32-char alphanumeric admin password
   and creates a critical task that points the user at **Show Space-CLI Web UI Credentials**
   so the password can be copied before login.
2. Seeds `store.json.btcAuth` with a random `spaces:<random>` RPC credential
   pair and creates a critical cross-service task on **Bitcoin** that runs
   bitcoind's `generate-rpc-dependent` action to register the credentials in
   `bitcoin.conf`.
3. Seeds `store.json.dbAuth` with a random PostgreSQL password (username
   `postgres`, database `spacesprotocol_explorer`). No task is created — the
   credentials are only used internally by the embedded daemon.
4. Runs the `postgres-chown` oneshot to create `/data/postgres` with the right
   ownership, then launches the PostgreSQL daemon on loopback 5432.
5. Seeds `store.json.spacedAuth` with a random `spaces:<random>` credential
   pair. Spaced is configured to require these via `SPACED_RPC_USER` /
   `SPACED_RPC_PASSWORD` (cookie auth is **not** used in this package), so the
   gotty terminal's `spaces` alias and the indexer share a single auth path.
6. Seeds `store.json.enableExplorer = false`. The embedded explorer
   (PostgreSQL + Go indexer) is **opt-in**.
7. Seeds `store.json` certrelay defaults: `certrelaySelfUrl =
   https://certrelay.spacesops.com`, `certrelayBootstrap = false`,
   `certrelayHealthcheckHandle = account-digital-useful.genesis@key`.
8. Launches `spaced` as a managed daemon (no `screen`, no shell auto-start)
   and the `gotty` web terminal once the bashrc oneshot completes.
9. Runs `certrelay-setup` (creates `/data/certrelay/data`, copies the `fabric`
   CLI to `/data/bin/fabric`) and launches the **certrelay** daemon on 7778.
   Certrelay is **always on**; its `CERTRELAY_SPACED_RPC_URL` uses the local
   spaced credentials from `store.spacedAuth`. Configure its self URL etc. via
   the **Configure Certrelay** action.

The user is **not** prompted to choose a chain or RPC mode — this package is
mainnet-only.

### Enabling the embedded explorer

Run the **Enable Embedded Explorer** action. That flips
`store.json.enableExplorer = true` and the service auto-restarts:

8. Postgres-chown oneshot creates `/data/postgres` with correct ownership.
9. PostgreSQL daemon starts on loopback `127.0.0.1:5432`.

> **TODO (prebuilt images pending):** the indexer and explorer-UI daemons are
> currently **stubbed out** in `startos/main.ts`. The build-from-source chain
> (`indexer-fetch` → `indexer-build` → `indexer-migrate` → `indexer`, and
> `explorer-fetch` → `explorer-install` → `explorer-ui`) was removed to shrink
> the `.s9pk` and cut startup time. Until prebuilt images are wired in,
> enabling the explorer starts **PostgreSQL only**; nothing populates the DB
> and the Explorer Web UI (port 3000) will not resolve. The `show-db-credentials`,
> `reset-db-state`, `reset-indexer-state`, and `reset-explorer-state` actions
> remain available.

Run **Disable Embedded Explorer** to turn it back off; on-disk data at
`/data/postgres`, `/data/explorer-indexer`, and `/data/explorer-ui` is
preserved.

## Configuration Management

| StartOS-Managed | Upstream-Managed |
| --- | --- |
| Web-UI username / password (`admin` + generated password) | `spaced` runtime tuning via `SPACED_*` env vars in the image |
| Bitcoin RPC username / password (registered on bitcoind) | Wallet creation, bidding, and registration -- all driven via `space-cli` inside the terminal |
| PostgreSQL username / password / database (loopback only) | `space-cli` flags and subcommands |
| Chain selection (locked to `mainnet`) |  |
| Spaced data directory and RPC bind |  |

## Network Access and Interfaces

| Interface | Port | Protocol | Exposure | Notes |
| --- | --- | --- | --- | --- |
| Space-CLI Web UI (gotty terminal) | 8080 | HTTP | LAN / `.local` / Tor / clearnet (via StartOS) | Basic auth: `admin:<store.password>` |
| Explorer Web UI | 3000 | HTTP | LAN / `.local` / Tor / clearnet (via StartOS) | SvelteKit explorer. **TODO** — daemon stubbed pending the prebuilt explorer image; the interface is still registered but nothing listens yet. |
| Subspaces Web UI | 7777 | HTTP | LAN / `.local` / Tor / clearnet (via StartOS) | `subs` daemon (subsd). No built-in auth. Only useful while Subspaces is enabled. |
| Subs API | 7777 | HTTP | LAN / `.local` / Tor / clearnet (via StartOS) | The subsd REST API (same daemon/port as above), exposed as a distinct `api` interface separate from the prover and registry. Only useful while Subspaces is enabled. |
| Subspaces Prover | 8888 | HTTP | LAN / `.local` / Tor / clearnet (via StartOS) | `subs-prover` RISC Zero prover server (no GPU). Its own StartOS interface. Only useful while Subspaces is enabled. |
| Subspaces Registry | 8081 | HTTP | LAN / `.local` / Tor / clearnet (via StartOS) | `registry-server` for publishing/resolving handles (remapped from its upstream default 8080 to avoid colliding with the gotty terminal on 8080). Its own StartOS interface. Only useful while Subspaces is enabled. |
| Certrelay | 7778 | HTTP | LAN / `.local` / Tor / clearnet (via StartOS) | `certrelay` server (always on). Serves cryptographic proofs binding handles to owner keys. **Setup:** run **Configure Certrelay** and set `CERTRELAY_SELF_URL` to the publicly visible URL StartOS exposes for this interface. |
| Spaces API (spaced RPC) | 7225 | HTTP JSON-RPC | LAN / `.local` / Tor / clearnet (via StartOS) | spaced JSON-RPC, now bound to `0.0.0.0` and exposed as the **Spaces API** interface. Static-cred-authenticated via `SPACED_RPC_USER` / `SPACED_RPC_PASSWORD` from `store.json.spacedAuth`. Internal clients still connect over loopback. |
| PostgreSQL | 5432 | Postgres wire protocol | **Loopback only** (`listen_addresses=127.0.0.1`) | Username/password from `store.json.dbAuth`; full `DB_URL` exported into the web terminal |

## Actions

| ID | Name | Visibility | Availability | Purpose |
| --- | --- | --- | --- | --- |
| `reset-password` | Reset Space-CLI Web UI Password | Enabled | Any | Regenerates the Space-CLI Web UI password and restarts the terminal daemon |
| `show-credentials` | Show Space-CLI Web UI Credentials | Hidden | Any | Surfaces the current `admin` username + masked password (launched by the first-install task) |
| `show-password` | Show Space-CLI Web UI Password | Enabled | Any | Same as `show-credentials` but visible in the actions list, for routine re-display of the current admin credentials |
| `set-bitcoin-rpc` | Set up Bitcoin RPC | Enabled | Any | Re-invokes bitcoind's `generate-rpc-dependent` with the stored credentials. Safe to call repeatedly. |
| `sync-status` | Sync Status | Enabled | Only running | Runs `space-cli getserverinfo` inside the daemon container and returns the JSON output |
| `reset-spaced-state` | Reset Spaced State | Enabled | Any | Deletes `/data/mainnet/` so spaced resyncs its index from spaces' anchor. Preserves `store.json` (passwords + RPC credentials). Use when spaced crash-loops on a stale or corrupt index. |
| `export-wallet` | Export Wallet | Enabled | Only running | Runs `space-cli exportwallet /data/mainnet/wallets_backup/default.json` and surfaces the resulting JSON as a masked/copyable result. The file is also persisted inside the volume at that path. |
| `import-wallet` | Import Wallet | Enabled | Only running | Accepts a pasted JSON payload (textarea), writes it to `/data/mainnet/wallets_backup/default.json` (rotating the existing file to `.bakNNN`), rotates `/data/mainnet/wallets/default` to `.bakNNN`, then runs `space-cli importwallet` + `loadwallet`. |
| `enable-explorer` | Enable Embedded Explorer | Enabled (hidden when already on) | Any | Sets `store.enableExplorer = true` and triggers a service restart so the full daemon graph (postgres + indexer + indexer-sync HC) takes effect. |
| `disable-explorer` | Disable Embedded Explorer | Enabled (hidden when already off) | Any | Sets `store.enableExplorer = false` and triggers a service restart so the indexer and postgres daemons stop. On-disk data at `/data/postgres` and `/data/explorer-indexer` is preserved. |
| `show-db-credentials` | Show Database Credentials | Enabled | Any | Surfaces the PostgreSQL username, password, database, and full `DB_URL` (all copyable; secrets masked). Credentials exist regardless of whether the explorer is currently enabled. |
| `reset-db-state` | Reset Database State | Enabled | Any | Deletes `/data/postgres` so the next start re-initializes an empty database. Warning-gated. `store.json` is preserved. |
| `reset-indexer-state` | Reset Indexer State | Enabled | Any | Deletes `/data/explorer-indexer` so the next start re-fetches the indexer source and rebuilds the sync + goose binaries. Useful when bumping the pinned commit. PostgreSQL data is preserved. Warning-gated. |
| `reset-explorer-state` | Reset Explorer UI State | Enabled | Any | Deletes `/data/explorer-ui` so the next start re-fetches the SvelteKit source and rebuilds the bundle. PostgreSQL data is preserved. Warning-gated. |
| `enable-subspaces` | Enable Subspaces | Enabled (hidden when already on) | Any | Sets `store.enableSubspaces = true` and triggers a service restart so the Subspaces chain (build → wallet → subs-prover → subs) takes effect. |
| `disable-subspaces` | Disable Subspaces | Enabled (hidden when already off) | Any | Sets `store.enableSubspaces = false` and triggers a service restart so the subs and subs-prover daemons stop. On-disk data at `/data/subspaces` is preserved. |
| `reset-subspaces-state` | Reset Subspaces State | Enabled | Any | Deletes `/data/subspaces` (runtime data only — binaries ship in the image). Use to wipe local handles/proofs. The spaces wallet on spaced is preserved. Warning-gated. |
| `set-subs-prover` | Enable / Disable Subspaces Prover | Enabled | Any | Toggle (`store.enableSubsProver`, default **off**) that starts/stops only the `subs-prover` daemon, independent of the overall Subspaces toggle. When off, the daemon doesn't start but its interface (8888) stays registered. Saving restarts the service. |
| `configure-certrelay` | Configure Certrelay | Enabled | Any | Sets `CERTRELAY_SELF_URL` (text), `CERTRELAY_BOOTSTRAP` (toggle), and `CERTRELAY_HEALTHCHECK_HANDLE` (text) in `store.json`; prefilled with current values. Saving restarts the service so certrelay picks up the new config. |

## Backups and Restore

`sdk.Backups.ofVolumes('main')` -- the entire `/data` volume is backed up,
including spaced state, wallets, the block index, and `store.json`. On restore,
the same idempotent init logic runs and reuses the existing credentials in
`store.json`.

## Health Checks

| ID | Display | Grace period | Behaviour |
| --- | --- | --- | --- |
| `postgres` (daemon `ready`) | Database | 60 s | TCP listen on `127.0.0.1:5432` |
| `spaced` (daemon `ready`) | Spaced RPC | 120 s | TCP listen on `0.0.0.0:7225` (exposed as the Spaces API interface) |
| `subs-prover` (daemon `ready`) | Subspaces Prover | 60 s | TCP listen on `0.0.0.0:8888`. Only present when Subspaces **and** the `set-subs-prover` toggle are enabled (toggle defaults off). Polled every 30 s; nothing depends on it. |
| `subs-registry` (daemon `ready`) | Subspaces Registry | 60 s | TCP listen on `0.0.0.0:8081`. Only present when Subspaces is enabled. |
| `subs` (daemon `ready`) | Subspaces Web UI | 60 s | TCP listen on `0.0.0.0:7777`. Only present when Subspaces is enabled. |
| `certrelay` (daemon `ready`) | Certrelay | 120 s | TCP listen on `0.0.0.0:7778`. Always on. Polled every 30 s. |
| `web-terminal` (daemon `ready`) | Web Interface | default | TCP listen on `0.0.0.0:8080` |
| `sync` (standalone) | Spaced Sync | 30 s | Exec `space-cli --output-format json getserverinfo`; reports `success` when `ready=true && progress=100%`, otherwise `loading` with progress percentage |
| `indexer` / `explorer-ui` / `indexer-sync` | — | — | **TODO** — removed with the build-from-source chain. Will return when the prebuilt indexer + explorer images are wired in. |

## Limitations and Differences

1. **Mainnet only.** Testnet, testnet4, signet, and regtest are not exposed.
2. **The Spaces image's `docker_entrypoint.sh` is not used.** Its auto-start of
   `spaced` inside `screen` would conflict with the StartOS-managed daemon.
3. **Space-CLI Web UI is a terminal, not a graphical app.** All Spaces operations happen
   via `space-cli` (aliased as `spaces` inside the shell).
4. **Externally exposed ports** (each a StartOS interface): 8080 (gotty
   Space-CLI Web UI, always on), 7225 (Spaces API / spaced RPC, always on),
   7778 (Certrelay, always on), and — only while their feature is enabled —
   3000 (Explorer Web UI, currently stubbed), 7777 (Subspaces Web UI), 8888
   (Subspaces Prover), 8081 (Subspaces Registry). **Loopback-only:** PostgreSQL
   (5432). The spaced RPC is authenticated (static creds) even though it's now
   externally exposed. The Subspaces registry is remapped from its upstream
   default 8080 to 8081 to avoid colliding with the gotty terminal.
5. **Bitcoin Core 31.x is the only supported dependency.** Earlier majors are
   not allowed by the manifest version range.
6. **The web terminal is independent of spaced.** Gotty stays reachable even
   when `spaced` is crash-looping, so you can always shell in to diagnose.
7. **The embedded explorer is opt-in — and currently PostgreSQL-only.** Fresh
   installs run in spaces-only mode (spaced + gotty). Run **Enable Embedded
   Explorer** to start PostgreSQL; **Disable Embedded Explorer** stops it. The
   indexer and explorer-UI daemons are **stubbed out** pending prebuilt images
   (the build-from-source chain was removed to shrink the `.s9pk` and cut
   startup time). So enabling the explorer today brings up an empty database
   and nothing else. PostgreSQL data is preserved across toggles.
8. **PostgreSQL is embedded, not a separate service.** There is no
   cross-service dependency on a postgres .s9pk; the database is local to this
   package, lives at `/data/postgres`, and is intended for the (pending)
   prebuilt indexer + explorer UI. Connect to it from inside the gotty
   terminal with `psql $DB_URL`.
9. **Subspaces pointers data note.** When the prebuilt indexer is wired back
   in, be aware our spaced binary predates the spaces pointers feature; the
   prior build-from-source indexer was patched to treat `ptrs_root` as optional
   and to skip the `getptrblockmeta` RPC. A future rebuild of
   `horologger/spaces` with a newer spaced will let us drop those patches.
10. **Subspaces is opt-in.** Fresh installs do not run Subspaces. Run **Enable
    Subspaces** to start it. It ships as the prebuilt `horologger/subs:v0.1.0`
    image (no compile step), so enabling is fast — the three daemons start as
    soon as the image is on the box. Enabling runs three daemons, each with its
    own StartOS interface: **subs** (Web UI, 7777), **registry-server** (8081),
    and — only if the separate **Enable / Disable Subspaces Prover** toggle is
    on (default **off**) — **subs-prover** (8888, no GPU). The prover's
    interface is always registered even when its daemon is off. subs loads the
    existing `default` spaces
    wallet at startup and does **not** create it — create it first from the
    Space-CLI Web UI with `spaces createwallet` if you haven't. Subspaces is
    independent of the Embedded Explorer toggle — you can run any combination
    of {explorer, subspaces}.
11. **Certrelay is always on.** It ships as the prebuilt
    `horologger/certrelay:v0.2.3` image (static musl binaries) and runs on
    7778 from service start. It talks to the local spaced over loopback using
    the `store.spacedAuth` credentials. The bundled `fabric` CLI is copied to
    `/data/bin/fabric` so it's runnable from the Space-CLI Web UI. **You must
    set `CERTRELAY_SELF_URL`** (via **Configure Certrelay**) to the publicly
    visible URL StartOS exposes for the Certrelay interface, or peers/clients
    won't be able to reach this relay at the advertised address.

- `space-cli` subcommands and flags work exactly as documented upstream.
- `spaced` honours all `SPACED_*` environment variables not otherwise set by
  StartOS.
- Wallet files, the spaces database, and the block index are managed by
  `spaced` itself; StartOS only provides the volume.
- bitcoind connectivity follows the standard StartOS dependency-service model
  (`bitcoind.startos:8332`).

## Using the Web Terminal

After install:

1. Run the **Show Space-CLI Web UI Credentials** action (the install task surfaces it).
2. Open the Space-CLI Web UI from the StartOS dashboard.
3. Log in with `admin` and the displayed password.
4. Use `spaces <subcommand>` -- it expands to
   `space-cli --chain mainnet --rpc-user "$SPACED_RPC_USER" --rpc-password "$SPACED_RPC_PASSWORD" <subcommand>`.

Examples:

```bash
spaces getserverinfo
spaces createwallet           # creates the `default` wallet (--wallet defaults to "default")
spaces balance
```

## Quick Reference for AI Consumers

```yaml
package_id: spaces
upstream_version: subspacesplus
images:
  spaces: docker.io/horologger/spaces:v0.0.9s
  postgres: docker.io/postgres:16.3
  subspaces: docker.io/horologger/subs:v0.1.0
  certrelay: docker.io/horologger/certrelay:v0.2.3
  # TODO: prebuilt indexer image (was golang:1.23-alpine builder, removed)
  # TODO: prebuilt explorer image (was node:20-alpine builder, removed)
architectures: [x86_64, aarch64]
volumes:
  main: /data
ports:
  ui: 8080
  explorer_ui: 3000     # interface registered; daemon stubbed (TODO prebuilt image)
  subspaces_ui: 7777    # external, only useful while subspaces enabled
  subspaces_prover: 8888  # external (its own interface), subspaces only
  subspaces_registry: 8081  # external (its own interface), subspaces only; remapped from upstream 8080
  certrelay: 7778       # external (its own interface), always on
  spaced_rpc: 7225      # external (Spaces API interface); spaced binds 0.0.0.0, auth-gated
  postgres: 5432        # loopback only
dependencies:
  - bitcoind
spaced_env_vars:
  - SPACED_CHAIN
  - SPACED_DATA_DIR
  - SPACED_RPC_BIND
  - SPACED_RPC_PORT
  - SPACED_RPC_URL
  - SPACED_RPC_USER
  - SPACED_RPC_PASSWORD
  - SPACED_BLOCK_INDEX
  - SPACED_BITCOIN_RPC_URL
  - SPACED_BITCOIN_RPC_USER
  - SPACED_BITCOIN_RPC_PASSWORD
  - BTC_RPC_HOST
  - BTC_RPC_PORT
  - BTC_RPC_USER
  - BTC_RPC_PASSWORD
  - APP_USER
  - APP_PASSWORD
  - DB_URL
postgres_env_vars:
  - POSTGRES_USER
  - POSTGRES_PASSWORD
  - POSTGRES_DB
  - PGDATA
explorer:
  default_enabled: false   # opt-in via Enable Embedded Explorer action
  store_field: enableExplorer
  status: postgres_only     # indexer + explorer-ui daemons stubbed; see TODOs
  reset_actions: [reset-db-state, reset-indexer-state, reset-explorer-state]
indexer:
  status: TODO              # build-from-source (Go) removed; prebuilt image pending
  prior_source_repo: spacesprotocol/explorer-indexer
  data_dir: /data/explorer-indexer   # reset-indexer-state still wipes this
explorer_ui:
  status: TODO              # build-from-source (SvelteKit) removed; prebuilt image pending
  prior_source_repo: randomlogin/explorer
  data_dir: /data/explorer-ui        # reset-explorer-state still wipes this
  port: 3000                # interface registered; daemon stubbed
subspaces:
  default_enabled: false   # opt-in via Enable Subspaces action
  store_field: enableSubspaces
  subs_prover_default_enabled: false   # separate toggle: set-subs-prover (store.enableSubsProver)
  image: horologger/subs:v0.1.0   # prebuilt; no compile step
  data_dir: /data/subspaces/data
  wallet: default          # loaded by subs, NOT created (create via space-cli first)
  daemons:                 # three separate daemons, each its own interface
    subs: { bin: /usr/local/bin/subs, port: 7777 }
    subs-prover: { bin: /usr/local/bin/subs-prover, port: 8888, gpu: none }
    registry-server: { bin: /usr/local/bin/registry-server, port: 8081 }  # remapped from upstream 8080
certrelay:
  always_on: true
  image: horologger/certrelay:v0.2.3   # prebuilt; static musl binaries
  server_bin: /usr/local/bin/certrelay
  fabric_bin: /usr/local/bin/fabric    # copied to /data/bin/fabric for the CLI
  data_dir: /data/certrelay/data
  port: 7778
  spaced_rpc_creds: from store.spacedAuth (local spaced)
  configurable_via_action: configure-certrelay
  env:
    CERTRELAY_CHAIN: mainnet
    CERTRELAY_BIND: 0.0.0.0
    CERTRELAY_PORT: '7778'
    CERTRELAY_REMOTE_IP_HEADER: x-forwarded-for
    CERTRELAY_ANCHOR_REFRESH: '300'
    CERTRELAY_SELF_URL: https://certrelay.spacesops.com   # default; set to your public URL
    CERTRELAY_BOOTSTRAP: 'false'                          # toggle via action
    CERTRELAY_HEALTHCHECK_HANDLE: account-digital-useful.genesis@key  # via action
  managed_env_vars:
    - POSTGRES_URI
    - BITCOIN_NODE_URI
    - BITCOIN_NODE_USER
    - BITCOIN_NODE_PASSWORD
    - SPACES_NODE_URI
    - RPC_USER
    - RPC_PASSWORD
    - ACTIVATION_BLOCK_HEIGHT
    - FAST_SYNC_BLOCK_HEIGHT
    - UPDATE_DB_INTERVAL
    - MEMPOOL_CHUNK_SIZE
  defaults:
    ACTIVATION_BLOCK_HEIGHT: '871222'  # spaces mainnet activation
    FAST_SYNC_BLOCK_HEIGHT: '864000'
    UPDATE_DB_INTERVAL: '5'
    MEMPOOL_CHUNK_SIZE: '200'
actions:
  - reset-password
  - show-credentials
  - show-password
  - set-bitcoin-rpc
  - sync-status
  - reset-spaced-state
  - export-wallet
  - import-wallet
  - enable-explorer
  - disable-explorer
  - show-db-credentials
  - reset-db-state
  - reset-indexer-state
  - reset-explorer-state
  - enable-subspaces
  - disable-subspaces
  - set-subs-prover
  - reset-subspaces-state
  - configure-certrelay
```